Micro Flowmeter 30-3000 L/h, G3/4″ Male, LCD, Battery or 5-24V
SKU KMN-FUEL-0091
Micro flowmeter with LCD for 30 to 3000 L/h on 3/4" lines, battery or 5-24V DC powered, for plants, workshops and farms, delivered nationwide.
R2 164,05
- Wide 100:1 range, from a trickle to 50 L/min
- Runs on battery or a 5-24V DC supply
- Flow range: 30-3000 L/h
- Connection: G3/4″ male thread
- Working pressure: 0-10 bar
Delivered by our own trucks in 1 to 3 days. R550 / R950 / R1,450 by order weight. FREE on orders of R20,000 or more with code KH027. Delivery details
Specifications
| Meter type | Inline micro digital flowmeter |
|---|---|
| Flow range | 30-3000 L/h |
| Accuracy | ±1% (typical) |
| Connection size | G3/4" male |
| Max pressure | 0-10 bar working |
| Material | Aluminium alloy body |
| Display type | Digital LCD |
| Power | Battery or 5-24V DC |
| Fluid compatibility | Diesel, light oils, water and other clean, thin fluids |
| Net weight | 0.5 kg |
| Shipping weight | 0.55 kg |
| Dimensions | 100 × 60 × 60 mm |
Description
Overview
This micro flowmeter measures flows from 30 up to 3000 litres per hour and shows the total on an LCD, with G3/4″ male threads at each end. What sets it apart is the wide range and the choice of power: run it off its battery, or wire it to a 5-24V DC supply when it lives on a control panel. It is the meter we reach for when a line runs slow most of the day but sometimes opens up.
It forms part of our fuel dispensing and metering equipment range. Pair it with the 0.2-10 L/min micro flowmeter or the digital metering nozzle with auto stop for a complete setup.
Key features
- 30-3000 L/h range covers slow drips and moderate transfers
- G3/4″ male threads, easy to plumb with standard fittings
- LCD readout for batch and running totals
- Battery or 5-24V DC power
- Rated for 0-10 bar working pressure
- Small, light body for panels and skids
Where it works
Water treatment works for municipalities in Gauteng and KZN use a 3/4 inch micro flowmeter on chemical dosing lines, where the flow is small and the cost of overdosing is high. On farms it tracks diesel to boilers, dryers and generators. Workshops fit it to measure oil or coolant top-ups, and fleet depots use it to check small additive pumps against the delivery note.
Fitting tip from the workshop: put a fine strainer ahead of the 3/4 inch micro flowmeter, because small rotors jam on rust flakes and tank sludge long before a big meter would notice. Mount it with the arrow pointing in the direction of flow, keep it out of direct sun where you can, and run a measured 10 litres through it once installed to confirm the reading before you rely on the totals.
What’s in the box
- Micro flowmeter with LCD
- Battery (fitted)
Delivery and warranty
Our own trucks run from Polokwane to all nine provinces and most orders arrive in 1 to 3 days. The shipping weight is 0.55 kg, which falls in the up to 30 kg band at R550, and delivery is free once your order reaches R20,000. Ask us for the warranty terms on this model.
Questions about this product
Can I wire it into my 12V or 24V system?
Yes. Besides its own battery, the meter accepts a 5-24V DC supply, so you can feed it from a 12V bakkie or 24V truck circuit, or from a panel power supply. That is handy when the meter lives permanently on a skid or dosing panel and you do not want to change batteries. Fit an inline fuse on the feed.
What is the lowest flow it will read?
It starts reading from about 30 litres per hour, which is half a litre a minute. That makes it a good fit for dosing pumps, burners and small generators. Below that, look at our 2-90 L/h pulse sensor, which is built for very slow flows and gives a signal to a controller instead of a local display.
How much pressure can it take?
The rated working pressure is 0 to 10 bar. That covers gravity feeds, small electric transfer pumps and most dosing pumps. If you are on the outlet of a high-pressure pump, fit a regulator or choose a heavier oval-gear meter. Send us your pump details and we will check the match before you order.
Do you deliver to a farm outside Bethlehem, and what does it cost?
Yes. Kamano trucks leave Polokwane for all nine provinces and most orders land within 1 to 3 days. This item ships at 0.55 kg, which puts it in the up to 30 kg band at R550. If your total order is R20,000 or more (VAT incl.), delivery is free, so it pays to add fittings or a second meter to the same order.
Nationwide delivery from Polokwane
Delivered to all nine provinces in 1 to 3 days
We deliver the Micro Flowmeter 30-3000 L/h, G3/4" Male, LCD, Battery or 5-24V with our own trucks to Johannesburg, Pretoria, Cape Town, Durban, Gqeberha, Bloemfontein, Polokwane, Mbombela, East London, Klerksdorp, Rustenburg, George, Thohoyandou and Kimberley, and to farms, mines and sites in between. This item ships in the R550 delivery band (up to 30 kg). Orders of R20,000 or more deliver free with code KH027.





