10SP160/9 10-inch Borehole Pump End, 110kW, 308 m Head

Description

Overview

The 10SP160/9 is a 10-inch stainless steel multistage submersible borehole pump (110 kW class). It lifts water up to 308 m at shut-off and still delivers 221 m of head at 2,000 L/min (120 m³/h). Peak flow is 216 m³/h, so it belongs on high-yield boreholes.

It is part of the 10SP160 range, a family with a nominal flow of around 160 m³/h, and it runs on three-phase power at 380 V or 525 V. Kamano supplies it as the pump end only, and the matching 110 kW 8-inch motor is quoted on request.

To size it, add your pumping water level, the lift to your tank and about 10% for pipe friction, then check the pump’s head at your flow beats that total. Get the yield-test result first, or the pump may run the borehole dry.

Key features

• Maximum head 308 m, maximum flow 216 m³/h, duty point 120 m³/h at 221 m.
• Needs a borehole with an internal diameter of at least 250 mm.
• Motors above 30 kW need a soft starter, star-delta panel or VSD sized by your electrician. None is included.

Where it works

Municipal bulk water supply in Gauteng, North West and KZN, where a single borehole must fill a reservoir. With 308 m of shut-off head it is a deep-lift pump for long rising mains and deep water levels.

What’s in the box

• 10SP160/9 pump end
• Not included: starter, cable, rope, delivery pipe, base plate

Delivery and warranty

Kamano delivers with its own trucks from Polokwane to all nine provinces in 1 to 3 days, including Klerksdorp, Cape Town, Polokwane, Kimberley, Upington and Mahikeng. At 122 kg it is over 100 kg, so delivery is on quotation, and orders from R20,000 ship free. Large pumps are often supplied to order, so confirm stock and lead time first. Ask us for the warranty terms on this model.

See also the next 10SP model, an alternative duty point and all borehole pumps.